bbbbbbb
Product Series
bbbbbbb |
Type |
Product Name |
Main Characteristics and Application |
bbbbbbb
bbbbbbb |
|
Single-mode fibrebb |
G.652.BDDD |
Matched Cladding SMF |
Low attenuation, low dispersion and low PMD satisfying the high bit-rate and long distance transmission. |
Download |
|
| G.652.D |
Low Water Peak SMF （FullBand®） |
Designed for operation over the full optical spectrum from 1260-1625nm. Outstanding optical performance supporting high speed transmission technologies such as DWDM and CWDM. |
Download |
| G.657.A |
Bending Insensitive SMF
（EasyBand®） |
Designed for operation over the full optical spectrum from 1260-1625nm. The minimum bending radius can reach 10mm while the fibre parameters meet or exceed the ITU-T recommendation G.652.D. |
Download |
| G.657.B |
Bending Insensitive SMF
（EasyBand Plus®） |
Designed for operation over the full optical spectrum from 1260-1625nm. The minimum bending radius can reach 7.5mm while the fibre parameters meet or exceed the ITU-T recommendation G.652.D. |
Download |
| G.655 |
Large Effective Area NZ-DSF
（Laposh®） |
Low attenuation, proper dispersion and low PMD satisfying 10-40Gb/s and long distance transmission system in C and L band. |
Download |
| G.656 |
High Capacity Low Dispersion Slope NZ-DSF
（HiPosh®） |
The transmission window is extended from C&L band to S-band even O band.Low attenuation, proper dispersion, low dispersion slope and low PMD satisfying 10-40Gb/s transmission system. |
Download |
| Multi-mode fibre |
G.651.1 |
Graded-index MMF （50/125µm） |
Low attenuation and high bandwidth and good bending resistance properties, which complies with or exceeds the ITU-T. Recommendation G.651.1 optical fibre specification and overfills the transmission demand of IEEE 802.3z Gigabit Ethernet. |
Download |
| G.651.1 |
Graded-index MMF （62.5/125µm） |
Low attenuation and high bandwidth, which complies with or exceeds the IEC793-2 type A1b optical fibre specification and overfills the transmission demand of IEEE 802.3z Gigabit Ethernet. |
Download |
| G.651.1 |
HiBand® Graded-index MMF |
Optimized for the use at 850nm and 1300nm. It complies with or exceeds the ITU-T Recommendation G.651.1 or IEC793-2A1b optical fibre specification and overfills the transmission demand of IEEE 802.3z Gigabit Ethernet. |
Download |
| G.651.1 |
MaxBand® 150-10Gb/s GIMM Fibre |
Fully support 850nm (SX) serial 10Gb/s application over 150 metres. |
Download |
| G.651.1 |
MaxBand® 300-10Gb/s GIMM Fibre |
Fully support 850nm (SX) serial 10Gb/s application over 300 metres. |
Download |
| G.651.1 |
MaxBand® 550-10Gb/s GIMM Fibre |
Fully support 850nm (SX) serial 10Gb/s application over 550 metres. |
Download |
